| SPECIFICATIONS
- MODELS AND VENTING FOR ALL PH-28R MODELS |
| BTU
Input Range |
19,000
~ 199,900 (fully modulating) |
| Maximum
Hot Water Output |
8.5
GPM (40 degree rise at 30 psi) |
| Minimum
Flow for Ignition |
0.66
GPM |
| Dimensions
(inches) |
14
7/8 (w) x 25 3/8 (h) x 11 1/8 (d) |
| Working
Water Pressure |
14
~ 150 psi |
| Temperature
Range |
100
~ 140 degrees F |
| Gas
Connection |
3/4"
NPT Femal (with included gas shutoff valve) |
| Water
Connection |
3/4"
NPT Male |
| Efficiency
Rating |
84% |
| DOE
Energy Factor |
0.82 |
Gas
Inlet Pressure
(Indoor and Outdoor Models)
|
Natural
Gas : Min 4.0"W.C.; Max 10.5"W.C.
LP Gas: Min 8.0"W.C.; Max 14.0"W.C. |
Gas
Inlet Pressure
(Direct Vent Model)
|
Natural
Gas: Min 4.5"W.C.; Max 10.5"W.C.
LP Gas: Min 10.0"W.C.; Max 14.0"W.C. |
Low
NOx Compliant
(SCAQMD Rule 1146.2) |
Yes |
| Electrical
Requirement |
120
V/60 Hz AC, 2 Amps |
| Power
Cord (Except Outdoor) |
10-foot.
3-pin indoor power cord (pre-installed) |
| Freeze
Protection |
Minus
30 degrees F (including windchill factor) |
| Controller/Diagnostic
Display |
UMC-117 |
| Electric
Manifold Ready? |
Yes:
2 to 20 units (use MIC-180 controller) |
| DUOnex™
Ready? |
Yes:
2 units with DUOnex™ Cable |
| Gas
Shutoff Valve |
Included |
| Vent
Requirement (Indoor/Direct Vent) |
4"
Category III stainless steel venting required |
| Vent
Maximum Length |
37.5
feet (with three 90-degree elbows) |
| Air
Intake (Direct Vent) |
4"
Stainless Steel, PVC or aluminum |
| Air
Intake Maximum Length |
37.5
feet (with four 90-degree elbows) |
| Net
Weight |
55
lbs. |
| SAFETY
ENGINEERING |
| Carbon
Monoxide Safety |
ICAD™
- Proprietary system to monitor and optimize combustion (Not on Outdoor version) |
| Flame
Failure |
Three
separate flame rods to monitor flame failure. |
| Anti-boil
Protection |
Temperature
Sensor |
| Anti-scald
Protection |
-
Bath controller maximum temp 120°F
- When on, Bath Controller takes priority over others.
- While hot water is running, Bath Controller max. temp. cannot be raised above
112°F. |
| FEATURES |
- Continuous hot
water on demand
- Energy-Saving
design
- Energy efficiency
- 30% more efficient than tank-type water heaters
- Compact, space-saving
design
- Self-diagnostic
program
- UMC-117 Main Digital
Remote control
- Remote control
displays adjustable temperature settings
- Exclusive film
wrap overheat limiter
- May be installed
as part of a circulating water system
- Built-in electric
blower on all models
- Double the performance
with DUOnex™
- 2-to-20 unit systems
with MIC-180 Controller
- Extensive diagnostics
and error display
|
| WARRANTY |
- 10 year (Heat
Exchanger) / 3 year (Parts)
|